Foam plugs

Mantidforum

Help Support Mantidforum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bossdog004

Active member
Joined
Sep 28, 2005
Messages
25
Reaction score
0
Location
Tampa, FL
I've seen this posted in the feeding areas and am wondering where to get them. It would make feeding fruit flys to mantids a lot easier than taking the whole to off.

Thanks!!

 
I searched the web for foam rod and eventually polyethylene foam rod and found it's used to fill wide gaps before caulking is applied to save on caulking. Home centers sell it up to 5/8" diam. but I wanted something larger in diameter than that. Log home suppliers sell it for filling the chinks in logs. I bought a 50' roll from http://www.aloghomestore.com/backer-rod.shtml. A sharp knife cuts it into 1" (just over 2 cm) lengths easily.

I made a mandrel by rounding the end of a piece of 4 x 4 and slide a deli cup over that. A hole saw (a drill bit) has a 1/4" guide hole in the center and I always start my hole there. The mandrel supports the cup from the inside around the new hole as it's being cut so there's no cracking. The 7/8" hole saw seems to be the correct size for these 1.25" plugs.

 
You can also use a metal pipe with rough edges to cut perfect holes in the sponge. I usually cut the sponge in a rough circle with a razorblade.

 
Thanks Ian, good tip, good tip! Whats that you say, I cannot hear you, I have my earplugs in... ha ha The backer rod comes in different diameters, we use it for our door and window installs! What did you pay for yours?

 

Latest posts

Top