Orchid Enclosure Tips

Advertise with us
shop deals on amazon
Shop deals on ebay
Mantidforum

Help Support Mantidforum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
LauraMG

LauraMG

Well-known member
Joined
Mar 15, 2010
Messages
1,519
Reaction score
3
Location
Oklahoma City
I just received an orchid mantis nymph (Hymenopus coronatus) in the mail today. I don't know if there's anything special or different that I need to do for it's enclosure. I've got a small critter keeper with some substrate on the bottom for moisture and a stick running the length of it. Since this is a more exotic species than my Chinese, I just wanna make sure I'm doing everything I can to ensure it's survival and happy life! Any tips or help would be greatly appreciated!!!

 
I don't recommend critter keepers for any mantis. Yes, they can work however the lid tends to allow food to escape and since mantids spend most of their time on the lid, you can't really see them.

You don't need to do anything special for these really. Just make sure they have a little extra humidity and good ventilation.

 
Yea, the critter keeper isn't my favorite but it works for now. I plan to upgrade to a split tank eventually for the 2 new ones I just got, but for now I have this smaller container.

 
Hi Laura, r these babies from me?
laugh.gif
I use the keeper too, wanna see mine?

 
Yes they are your babies! I was just looking at one of your posts and put 2 and 2 together when I saw your email address!!! And I would love to see your enclosures to give me some idea of what I should have as a permanent home for them.

 
I use critter keepers for all my mantids and have been since I started raising them and also used sports drink bottles and glass jars and also using a 10 gallon and a 5 gallon tank to house some as well and the critter keepers are good for insects that are bigger then fruit flies. Also I make sure the insects and crickets that are used as food is bigger then the vents in the keeper and some people dislike the critter keeper but I have not had a problem using mine and I keep them in good condition despite some have a few cracks in them but still serves their purposes!

 
Last edited by a moderator:
ok, here is the one I made and I put in plastic divider so I could carry two with me.

MVC-759F-1.jpg


MVC-760F-1.jpg


I put screen in the top lid to keep in tiny guests we have over for dinner
laugh.gif


 
May I ask where you get the screens from? Online or local store? I need to get some so I won't cut off air yet keep in those tiny little buggers

 
That is window screen, at hardware or your local diy or wally mart, I have it to , but is easier for u to get at local store. unless u want the no see em screen, then I got it too.

 
Cool, that does look much prettier than the containers I use for my mantids. I dont have orchids, though. I keep a fake ivy vine I got from the dollar tree, cut into pieces to fit my modified food storage type cups. It still doesn't look as pretty as hibiscusmile's, :lol:

 
LOL, they certainly do come in all shapes and sizes! I think I'll go get some fake flowers tomorrow. Does anyone know if hot glue (cooled of coarse) can harm them in any way? I wanna buy another five gallon aquarium and split it eventually

 
We use the hot glue guns that are low heat guns and it does not stay sticky after it cools, so buy one of those with the multitemp glue and it will be ok.

 
We use the hot glue guns that are low heat guns and it does not stay sticky after it cools, so buy one of those with the multitemp glue and it will be ok.

 
I get the fiberglass screen from Lowes or Home Depot. It is inexpensive and works great.

 
hibiscusmile said:
ok, here is the one I made and I put in plastic divider so I could carry two with me.

I put screen in the top lid to keep in tiny guests we have over for dinner
laugh.gif
Click to expand...
I do the same with a few Critter Keepers and two small aquariums that have a hinged lid. Instead of the screen I use the plastic grid stuff similar to cross-stitch material that has small enough holes to keep in the fruit flies (I think you used to sell it too). The silk flowers & leaves take care of the issue of some mantids not being able to cling to plastic well. Also because opening that 'feeding door' in the lid is almost as crazy as opening the whole top when you have an active mantid, I only cut a hole big enough for a sponge stopper for feeding. One hole on each side of the divider for the ones I have 2 mantids in. Makes it easy to feed each side without having to watch for two mantids trying to get out or at each other. :D

Mikey

 
How long should I let the hot glue cool before putting them back in the enclosure? Until cool to the touch or should I wait a day or so? Also, flower mantis molted today! Yay!

 

Latest posts

Top