Pics of my mantid setup

Mantidforum

Help Support Mantidforum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pak-40

Well-known member
Joined
Jan 25, 2007
Messages
55
Reaction score
0
THe 1 gallon aquariums I buy at wal mart. They are about 10 bucks each, but come with a light at the top. I cut out two sides and the back and replace with mesh. I also add mesh to the top so the mantids can hang better. I use spagnum moss as a substrate.

The smaller containers I buy at Hobby Lobby. They are very convenient for smaller mantids. When I need to clean them, I just pull the top off and set them down. The mantids almost always hang from the top. I cut the tops out of them and replace with mesh.
364.jpg


 
You know whats wierd? You have my kitchen wallpaper.

Im going to get a new one now.

 
I work right at the container store, So I buy the little containers you are using for my mantis as well, The plastic is very hard on those little containers, So I find it hard to get the mesh in. But I like using them for my mantis.

 
oh my god. My Walmart sells the 10 gallon for $20!!!! :evil:

 
I have Orchids, Ghosts, Budwings, and Asian Giants.

3 adult female Orchids (two are about to lay!) ....and an ooth.

4 Ghosts....1 adult male, 1 adult female, 2 sub-adult females

7 Budwings...1 adult male, 1 adult female, 2 sub-males, 3 L4????

9 Asian Giants.....L3/L4????????

 
THe 1 gallon aquariums I buy at wal mart. They are about 10 bucks each, but come with a light at the top. I cut out two sides and the back and replace with mesh. I also add mesh to the top so the mantids can hang better. I use spagnum moss as a substrate. The smaller containers I buy at Hobby Lobby. They are very convenient for smaller mantids. When I need to clean them, I just pull the top off and set them down. The mantids almost always hang from the top. I cut the tops out of them and replace with mesh.
364.jpg
Nice looking collection! I liked the looks of the smaller containers from Hobby Lobby that picked some up last evening. What did you use to cut out the tops without cracking them?

And you are lucky, our Walmart doesn't carry any of those nice 10gal for $10...I'm envious!

Thanks!

Lee

 
I have a Dremel tool that I use. With a cutting wheel, it is really simple.

 
I have a Dremel tool that I use. With a cutting wheel, it is really simple.

 
OK, I dug out my dremel and a cutoff wheel…not what I expected, they plastic melted and balled up along the cutting surface. Can you snap a pic of which cut off wheel attachment you are using, maybe I used something different??

Btw, I did manage to finish one up and I LOVE how professional they look and how much easier it is to see the mantis hanging from the top compared to my 24oz cups (they have a ripple or ridge near the top which distort the view)

 
Ill post a pic of the wheel when I get home tonite.

Here a couple of tips:

Make sure the mesh goes down to the bottom inch or so of the container. The first one I did, I did not take the mesh down low enough and the air stagnated at the bottom increasing the mold growth. By providing air flow near the bottom, mold has not been an issue.

Make sure and put mesh at the top so the mantids can hang.

I bought smaller light bulbs as the ones provided got rather hot.

 
Top